Tired of wrapping your excess harness with zip ties?
ASR innovative design allows you to locate your belts from moving out of position on the harness bar, and a build in reel to wind up the excess belt material. Making it a tricked look!
Made out of lightweight billet aluminum and machined in our shop in California!
1.75" +/- .010"
1.5" +/- .010"
40mm +/- .25mm
(Note: Item comes in pair)
Bar Size: Refers to the diameter of the bar you wish to mount the Harness Bar Reel to.
Belt Width: Refers to the width if the harness strap you are using.
2 - Harness Bar Shaft Collars
2 - Slotted Harness Tabs
2 - M6 Flat Head Bolts
4 - M3 Socket Head Bolts
MADE IN U.S.A.
Tools Needed for installation
Allen Hex Key 2.5mm
Allen Hex Key 4mm
Disclaimer: This is not a structural part. Your harness should be properly mounted onto the harness bar before using this part. This part is not intended to mount your harness. It is simply to hold the excess harness material. If you are not sure on how to route your harness have a professional install it or read this install on Wrapping Instructions.