Civic 92-95 (EG Chassis)
Brace Only Kit
The original and still the best subframe brace on the market! The ASR brace is a prerequisite when upgrading to a larger diameter anti-roll bar. The brace minimize the chance of the dreaded subframe tear out that many have experienced with other products.
The ASR brace is the foundation of a modular design system and can be upgraded as you progress in your motorsports level. The brace is direct bolt on and is compatible with OEM Integra Type R 22-23mm and ASR 24mm anti-roll bar kit. The brace can also be upgraded to use the ASR 32mm hollow bar. (counterfeit warning)
$190 EG-RB-01
24mm Anti-roll bar
Designed to work with your ASR brace, the 24mm anti-roll bar upgrade kit offers the right balance of roll stiffness for your dual purpose street/track car. The anti-roll bar features 2 position adjustability and is approximately 46% stiff and 38% soft setting over the Type R 22mm anti-roll bar. It comes with billet aluminum brackets with polyurethane bushings. This anti-roll bar kit requires ASR endlinks.
(Endlinks are an optional addition)
$170 EG-24S-01
Complete Anti-roll bar and Reinforcement kit
ASR Complete subframe reinforcement brace with anti-roll bar kit for 92-95 Civic. Kit comes with 24mm 2 way adjustable anti-roll bar, endlinks and all necessary hardware. The brace is upgradeable to the ASR Racing 32mm hollow bar.
$390 EG-RBS-02
32mm Racing Hollow Anti-roll bar Kit
ASR Complete subframe reinforcement brace with 32mm by 2.5mm wall hollow anti-roll bar kit for 92-95 Civic (EG chassis). This is the ultimate bolt on anti-roll bar set up for the serious enthusiast.
Please note: This kit can be custom ordered with different wall thicknesses. (How to choose)
$570 EG-RS-01
32mm Racing Hollow Anti-roll bar Upgrade Kit
(For use with ASR subframe braces only)
32mm 3 piece hollow anti-roll bar upgrade kit is the ultimate anti-roll bar for your track car.
Anti-roll bar are made with heat treated chromoly steel for their excellent strength to weight ratio.
The bearing are housed in a pillow block made in billet aluminum. The self-centering bronze bearing offers maintenance and bind free operation.
The design enables the user to do easy 5 minute track side bar swaps to suit changing conditions and the multiple adjustments holes on the arm allows for fine tuning.
Please note: This kit can be custom ordered with different wall thicknesses. (How to choose)
$390 DCR-RS-01
Subframe Backing plates
Included in ASR subframe brace, these billlet backing plates can now be bought separately. Machined out of 6061 T6 Aluminum, these subframe backing plate reinforces the OEM sway bar mounting points by distributing the load to a larger area. Holes are threaded M8 X 1.25 for compatibility to factory hardware.
$20 EG-BP-01